51
PTZ
D VR User Manual
6.4 PTZ Protocol Setting
Click Start
→
Settings
→
Camera
→
PTZ
→
Protocol to go to the interface as shown
below. You can enable or disable the PTZ and set the protocol, baud rate and address of the
analog dome in the interface. Please make sure the analog speed dome camera is well connected
to the DVR before you control it.
Select the camera and enable PTZ and then set the protocol, baud rate and address of the dome
according to the settings of the dome.
Protocol
: The default communication protocol of the DVR is COC. Range from: PELCOP,
PELCOD, LILIN, MINKING, NEON, STAR, VIDO, DSCP, VISCA, COC, etc.
Address
: The address of the PTZ device.
Baud Rate
: Baud rate of the PTZ device. Range from: 110, 300, 600, 1200, 2400, 4800, 9600,
19200, 34800, 57600, 115200, 230400, 460800, 921600.
Summary of Contents for SVD-2404A
