Playback & Backup
DVR User Manual
68
Zoom In
Click it to go to the zoom in interface. The zoom in interface is
similar to that of the camera window in the live view interface.
Click
to pause the record playing; click
to play the
record. When the record is paused in forward playing mode, you
can click
to view the previous frame and click
to view
the next frame.
Add Tag
Click it to add tag. You can play back the record by searching the
added tag. Click it and then enter the tag name in the popup
window. Click “Add” to add tag.
Switch Camera
Click it to switch the playback camera. Click it and then check the
camera in the popup window. Click “OK” to change the camera.
Close Camera
Click it to close the playback camera.
Introduction of area
④
:
Click
to set the date; click
to set the time and then the playback camera will play the
record from the time you set. You can check the record type as required for record playback; first
you should click
on the tool bar at the bottom of the interface to clear all the playback camera,
then check the record type ( : manual record; : sensor based record;
: motion based record; :
schedule record; : intelligence record; : POS record) and finally click in the playback window to
add camera for playback (the record time scale will show the record data of the checked record
type only after the above operations).
Introduction of the record time scale (area
⑤)
:
A tool bar will appear after moving the mouse to the record time scale. Click
to zoom
the timeline; click
to recover the timeline to 24 hours’ ratio. Drag the timeline or slide the
scroll wheel of the mouse on the time scale to show the hidden time on the top or bottom of the
timeline. You can also click
to show the hidden time on the top of the timeline or click
to show the hidden time on the bottom of the timeline. Drag the slider at the bottom of the time
scale to show the hidden playback cameras.
The record time scale shows different record types with different colors. The green block stands
for manual record, red block stands for sensor based record, yellow block stands for motion based
record, blue block stands for schedule record and cyan block stands for intelligence record. Click
the record block to set the time and then the playback camera will play the record from the time
you set.
Drag the color block on the time scale to select the backup area and then right click the area or
click
to pop up a backup information window. Click the “Backup” in the window to pop up
the backup window. Select the device, backup path and backup format and then click the
“Backup” button to start the backup.
8.3 Smart Playback
⚫
Smart Playback Settings
/
Summary of Contents for SVD-2404A
