6212A Manual Version 14.56.docx
Page 24 of 58
Select and open the desired controller setup file. This presents information that will transfer to the Lasercheck
controller and define the measurement
Controller Setup Files
See the Appendix - Setup Files for more information on these files that are integrated into overall Lasercheck
setup files.
Creating Controller Setup Files
Included with the software is an Excel spreadsheet program titled “Setup File and Calibration Template.xls”. This
program is found in the C:\Program Files\Lasercheck\Calibration directory created by the installation program. It
is designed to calibrate the Lasercheck for specific processes and integrate the calibration in Lasercheck setup
files.
Detailed instructions on how to perform calibrations and use this Excel program are in the appendix of this
manual under the section titled “Appendix - Calibration Procedures”. The three setup files that the spreadsheet
creates can be renamed as long as the name is not longer than eight characters and its three-character
extension, “.SET”, remains. These setup files need to be transferred to the control box; see the Receive
Command in the section on File Management.
Open Lasercheck Windows Setup Files
Select Setup/Open. A series of pre-installed Lasercheck Windows setup files will be presented.