82C929 MAD16Pro Audio Card
6
913-0000-000 Revision 1.0
July, 1994
1. Insert the MAD16 Pro Installation Disk into drive A or B. Let us assume that you are
using drive A in this procedure.
2. Type
A:
at the C:> prompt. Press
<ENTER>
.
3. Type
INSTALL
at the a:> prompt. Press
<ENTER>
. The install program will do the
following for you:
a.)
Select MAD16 Pro Install Directory:
Prompt you for the drive and directory where you want MAD16 Pro software to be
installed. Press <ENTER> to accept the default drive and directory.
b.)
Location of Windows Directory:
Prompt you for the drive and directory of your Windows directory if you already have
Windows 3.1 installed.
c.)
Select CD-ROM Interface:
Asks if you want to interface your sound card to the CD-ROM drive.
If so, you will be prompted for the type of CD-ROM and its hardware settings. Please
refer to the chapter on connecting your CD-ROM to
your sound card if you have not done so.
IMPORTANT
You must state the exact hardware settings that corresponds to your CD-ROM drive. For
example, when you are installing your
CD-ROM device driver
and you have chosen
340H as the Base Address, then when prompted by your MAD16 Pro installation
software for the CD-ROM Base Address, you must choose 340H which corresponds to
your
CD-ROM device driver
. You must do the samething for the interrupt request as well
as the DMA channels.
d.) Select MAD16 Pro Hardware Settings:
Prompts you for the hardware settings of your MAD16 Pro sound card. We recommend
that you accept the default settings shown. If you decide to change the default settings later
on, the setup and configuration program
sndinit.exe
will allow you to do so.
e.) Display Summary:
Displays a summary of the installation options that you have chosen for confirmation
before proceeding.
f.) Modify your system files upon confirmation:
Upon confirmation of your installation options, your MAD16 Pro software will be copied
to your hard disk and you will be asked if your system files ( config.sys, autoexec.bat ) can
