opti-solar SP5000 Vitality Eco, Installation & Operation Manual, Page: 45 / 57

43
Monitoring SP5000 Vitality Eco
To do this, you need to have RS485 connection and related software. Please
refer to Connecting RS485 for proper connection and setting; please refer to
separate software manual for installation and application.
If you need send monitoring data to Internet, please use CloudLOG TM gateway.
Please contact with your local dealer for further information.
Using USB
Download Data to USB stick
You can plug in a pre-formatted USB stick into USB
port to download the operation data.
The stick
must be FAT or FAT32 formatted.
To do this, plug in a USB stick. LCD will show
“Download Data Processing”.
After plugging in the USB, all data inside the
SP5000 Vitality Eco will be downloaded to the
stick automatically. LCD will show corresponding
status.
After downloading, while LCD shows “Download Data Finished”, you can then
pull off the USB disk.
Firmware Upgrade
You can upgrade SP5000 Vitality Eco by USB disk with official firmware. To do
this, you need to have the firmware in a USB stick. To update by USB, please
get the latest firmware, put it into a blank USB disk, plug the USB disk to
SP5000 Vitality Eco, it will start the upgrade automatically. Contact your local
dealer for more information.