opti-solar SC-160X MPPT, Installation And Operation Manual

Page: 51 / 53

5-15
charging, reduce loads, or expand the PV array to ensure that batteries are fully
recharged. For maximum service life batteries should be fully recharged at least
once every five to ten days.
G-03: Set Day LOG# (1-90)
Use G-03 to set the Day Log number to display the energy harvested from PV
array (shown in G-04 and G-05) by OPTI-Solar SC MPPT Series over a period
of time.
If it is selected as #2 displays past power production since the last power cycle
(or up to 90 days previous) along with the date of day before the current date.
Use UP and DOWN keys to select the date by one and the energy harvested on
the date shown is displayed in G-04.
G-04: Day LOG# :kWHr
This screen displays how much the solar energy was harvested in kWHr and AHr
according to the selected day shown in G-03.
G-05: Day LOG# @FLOAT
This screen displays how much time the charger was in Float mode according to
the selected day shown in G-03.
G-07: Average Last Days
xxxxx kWHr xxxx AHr
This screen shows the average power produced over the past cumulative days as
both in kWHr and AHr.
G-08: Average Last Days
FLOAT xx : xx
This screen displays how much average time the charger was in Float mode in
the past cumulative days, shown in Hour: Minute.
G-09: Clear Energy Harvest
Use Constant G-09 to clear Today’s Data or all the Logged Data.