12
4
Wiring
Before wiring, turn off the power switch of SC-U1 or
disconnect the power cable from the supply source and wire
the power cable after all the other wiring is complete.
Connect the sensor to SC-U1.
・
The cable clamp fits the cable diameter
of 6 to 8 mm.
・
The sensor cable must be shielded
(CVV-S) with a nominal cross-sectional
area of 0.2 to 1.25 mm
2
.
・
Refer to “Extension of sensor cable”
P.11 for extension of the sensor cable.
To extend the sensor cable, connection
using pull box is recommended.
・
Wire the terminal block according to the
color of the tip of each wire.
Use this product by connecting to Universal Transmitter SC-U1.
For installation and wiring to SC-U1, refer to the "Universal Transmitter
SC-U1 Installation Manual".
1
Sensor
Sensor
Power
Supply
Signal
input
(RS485)
(Blue) (Brown)(Black) (White)
Shielded wire
Po
wer supply
+
Po
wer supply
-
RS485 A
RS485 B