Adjustment
27
Reference
When a 2-point adjustment is performed, the offset and span
adjusted values will automatically replace the values calculated
from the displayed and adjusted values of the 2-point adjustment.
Adjustment initialization
Select [Initialize Adjustment Value]
using
, and press
.
3
$GMXVW
㸰
7XUE7&'
2IIVHW$GMXVWPHQW)78
6SDQ$GMXVWPHQW
3RLQW$GMXVWPHQW
,QLWLDOL]H$GMXVWPHQW9DOXH
$GMXVW
㸰
7XUE7&'
,QLWLDOL]H$GMXVWPHQW9DOXH
12
<(6
Reset the adjustment value to the factory default value.
Press
.
The measurement item selection display is displayed.
1
2
$GMXVW
0HDVXUHPHQW,WHP6HOHFW
㸯
S+ࠉ6(S+'
㸰
7XUE7&'
㸱
'2'26
㸱
7HPS'26
Measurement item
Sensor model
Sensor channel
Select [Turb. TC-3000-D] using
, and press
.
$GMXVW
㸰
7XUE7&'
,QLWLDOL]H$GMXVWPHQW9DOXH
4
・
Selecting [Yes] executes initialization
and displays a progress bar.
・
Selecting [No] cancels initialization
and returns to the initialize
adjustment value menu.
Select [NO] or [YES] using
, and press
.
During initialization a progress bar is
displayed.
After completion, the adjustment value
is initialized and the display returns to
the measurement value display.
The initialize adjustment value menu is
displayed.
Use
to switch pages.
The adjustment menu is displayed.
TC-3000SP-D is also displayed as
[TC-3000-D].
