18
19
CAUTION:
・
When Err6 is displayed, the value is out of the setting range.
4
Press to terminate the Signal Output Range High
Limit Setting.
3
Enter "300" on the Display.
2
1
Press for 2 seconds or more, the
Signal Output High Limit value is
displayed.
Press and select the Signal Output
High Limit.
Move the digit to be entered using the right and left arrow buttons
(1 digit 10 digit 100 digit 100 digit).
At this time, the selected digit blinks.
・
・
・
Reference
・
Enter a numerical value (0, 1, 2, ..., 9) into the selected digit using the
upper and lower arrow buttons . button increases a numeric
value and button decreases the value.
While pressing buttons, the values displayed are continuously
changed.
To cancel the Signal Output High Limit Setting, press .
CAUTION:
・
When Err6 is displayed, the value is out of the setting range.
(2) Signal Output High Limit Setting
※
"-Hi-" and "the setting value" comes on
alternatively.
Pip
Pip Pip
Fine Adjustment of Signal Output
6
Fine Adjustment of Lower Limit 4mA and Upper Limit 20mA of Signal
Output (4-20mA) can be made.
・
When both right and left arrow buttons are pressed simultaneously, Signal
Output of 4mA will be produced irrespectively of the measurement value.
CAUTION:
・
First make the Fine Adjustment of Lower Limit 4mA, and then make the Fine
Adjustment of Upper Limit 20mA.
・
Otherwise the value of the Upper Limit 20mA cannot be adjusted accurately.
CAUTION:
Fine Adjustment of Lower Limit 4mA
1
2
1
While making sure of the values displayed by the
connecting equipment such as recorder, make the Fine
Adjustments of the Lower Limit 4mA with the up and down
arrow buttons .
Simultaneously press both right and left
arrow buttons .
At this time, "-4-" is indicated in the Display.
And, "ZERO" blinks and "SPAN" comes on.
＋
4
Press to terminate the Fine Adjustments of the Lower
Limit 4mA.
Reference
・
To cancel the Fine Adjustment of the Lower Limit 4mA, press .
4
Press to terminate the Signal Output Range Low Limit
Setting.
・
To change the Display for the Measurements Indication mode, press
again.
