25
Engrave with Laser
12. Power the laser module.
a. Insure that all persons viewing have the proper eye protection / safety goggles.
b. Turn on your Adapter, the switch should glow red, and the fans on the laser module should spin-
up.
1.
13. Start Engraving
a. In the "Laser" widget,
1. Insure that "
Start From:
" is set to "
Absolute Coords
".
2. Trace / Frame the engraving on the work area before you engrave.
1. Click
2. This will move the tool head, outlining where it will be engraving in.
3. When ready, press
to start engraving.
b.
14. Laser will begin engraving.
