ATTACHING THE GLARE SHIELD
The glare shield reduces the effects of reflected light on the LCD display, as
well as magnifies the LCD display by 300%.
To attach the glare shield to the back of the camera:
1. Place the glare shield over the camera display.
2.
Insert the latches (A) into the strap hooks (B) on the back of the
camera.
3.
Tighten the glare shield strap.
To release the glare shield, pull up on the strap buckle and loosen the strap.
CAUTION
Clean the glare shield lens using only a dust pen blower and the LensPen
brush (see
). Do not use any cloth or other material to
clean the glare shield lens, as this can easily scratch the plastic surface.
A
B
Operation | Attaching Accessories to Camera
77.
MENU
EyeCGas® 2.0 | User Manual Rev 01 | Doc P/N: UM-8G9A0000B
