Opex Falcon+, Operator'S Manual

Page: 82 / 132

82 Working with Jobs
Operator Manual
OPEX Corporation
4.12.1. CertainScan Internal Batch Editor
If there is a problem with the scanner and/or CertainScan does not close
properly during a run, a batch may not be closed and saved properly. If this is
the case, you will be notified that a temporary batch file exists when restarting
CertainScan (Figure 4-16).
Figure 4-16: Temporary Batch Error
Click the
OK
button to continue, and log into the system. After logging in, the
following message will appear (Figure 4-17):
Figure 4-17: Non-Fatal Problems Detected in Batch - Error Message
Click the
OK
button to continue. The Batch Editor opens with another error
message instructing the operator to delete at least one item (usually the last
scanned item) and close the batch in order to repair it (Figure 4-18).
Once you have deleted an item, click the
Exit
button to close the Batch Editor.
If the batch was repaired properly, a dialog box will appear notifying the
operator that the batch is now valid.