Opex DS2200, User Manual

Page: 69 / 90

Operational Maintenance 69
DS 2200 User Manual - OPEX Corporation use only - not for distribution
Cleaning the System
When properly maintained, the DS2200 will continue to operate efficiently and
smoothly. However, over time, dust and dirt buildup can degrade the perfor-
mance, resulting in problems such as skewing, double feeds, document
hesitation and damage. The conveyor, stacker assembly, feed assembly (feed
belts, idler pulleys, pre-feed tire, retard pad) and the CIS (contact image
sensor) require regular cleaning.
Regular and scheduled maintenance will ensure that the DS2200 continues to
function properly, with minimum downtime and maximum efficiency. This
maintenance procedure consists of debris/dust removal and general cleaning.
Conveyor and transport assemblies
1 Stop all jobs and ensure that all motors are stopped.
2 Check the clamshell area once a shift. Open the clamshell door (Figure 24)
and clear the area of paper debris, dust, envelope flaps, etc.
CAUTION
Caution: Be careful when working with cleaners. A cleaner-soaked cloth or
similar material should never be used to clean moving objects. For example,
do not clean belts or rollers when the motors are running. The use of a cloth
or a similar material on moving mechanisms can result in severe personal
injury. If a belt, roller, pulley, or a similar part needs to be cleaned, hand-
crank it during cleaning or clean it while stationary.