Opex DS2200, User Manual

Page: 88 / 90

88 Statistics
DS 2200 User Manual - OPEX Corporation use only - not for distribution
The Stops section lists the following:
Skew 9 Sensor Blocked The Skew 9 Sensor is blocked.
Skew 8 Sensor Blocked The Skew 8 Sensor is blocked.
Skew 7 Sensor Blocked The Skew 7 Sensor is blocked.
Skew 6 Sensor Blocked The Skew 6 Sensor is blocked.
Skew 5 Sensor Blocked The Skew 5 Sensor is blocked.
Skew 4 Sensor Blocked The Skew 4 Sensor is blocked.
Post Feed MFD Trail
Sensor Blocked
The Post Feed MFD Trail Sensor is blocked.
Stepper Stall Detected A Stepper Motor has stalled.
Pre Crush Roller Sensor
Blocked
The Pre Crush Roller Sensor is blocked.
Feed Entry RX Present
Sensor Blocked
The Feed Entry RX Present Sensor is blocked.
Fan Failure Detected A fan has stopped functioning.
Table 7: Reasons for stops
Feeder Jammed
Results when the lower skew detect sensor has
been blocked for a specified period of time. Both
the feed jammed time and feed streaming time
define this period.
Upper Skew Detect
Sensor Blocked
Results when the upper skew detect sensor is
blocked by something when the system is
attempting to start up.
Middle Skew Detect
Sensor Blocked
Results when the middle skew detect sensor is
blocked by something when the system is
attempting to start up.
Lower Skew Detect
Sensor Blocked
Results when the lower skew detect sensor is
blocked by something when the system is
attempting to start up.
Table 6: Reasons for jams (continued)