Opex DS2200, User Manual

Page: 86 / 90

86 Statistics
DS 2200 User Manual - OPEX Corporation use only - not for distribution
Unexpected Piece at Bin
2 Sensor
Results when a piece is detected at the bin 2
sensor that the software was not expecting. A
gate that did not fire properly usually causes this
to occur.
Unexpected Piece at Bin
3 Sensor
Results when a piece is detected at the bin 3
sensor that the software was not expecting. A
gate that did not fire properly usually causes this
to occur.
Unexpected Piece at Bin
4 Sensor
Results when a piece is detected at the bin 4
sensor that the software was not expecting. A
gate that did not fire properly usually causes this
to occur.
Unexpected Piece at Bin
5 Sensor
Results when a piece is detected at the bin 5
sensor that the software was not expecting. A
gate that did not fire properly usually causes this
to occur.
Invalid Piece Complete
Response Results when an invalid piece id is received
from the host upon piece completion.
Piece Thickness Sensor
Null Below Minimum
Results when the thickness sensor is lower than
the minimum null defined in the machine
parameters.
Piece Thickness Sensor
Null Above Maximum
Results when the thickness sensor is greater
than the maximum null defined in the machine
parameters.
Piece Thickness Sensor
Runout Problem
Results when the thickness sensor runout is
greater than the maximum runout defined in the
machine parameters.
Missing Piece at Straight
Through Path Results when the piece was supposed to go to
the stacker bypass bin but didn't.
Batch Manager has an
Internal Error Results when there is an internal error within
Batch Manager.
Detected a File Write
Error
Results when the software detects a problem
with writing image or batch files to the specified
directories.
Table 6: Reasons for jams (continued)