Opera Nivel Pro, Operating Instructions Manual

Page: 22 / 28

19
CLEANING AND CARE
EN
5.5 Remove liquids from the appliance
The water collector catches any liquids that flow into the appliance through the inlet opening.
Do the following:
x Switch off the fan and deactivate the after-run function (see Operation chapter).
x Remove the air inlet glass and the condensation filter.
x Take the water collector and pour the water into the kitchen sink.
Rinse the water collector with hot water and dry it with a tea towel. x
5.6 Regenerating and replacing the activated carbon filters (only in C - version)
After a prolonged use the activated carbon filters saturate and it is necessary to regenerate them with a heating
process.
Do the following:
x Make sure that the cooktop and cooktop extractor are switched off (see the Operation chapter).
x Wait until the fan indicator shows 0.
x Remove the activated carbon filters.
x Unscrew the filters box put it in an oven pre-heated to 180°C for one hour.
x Press below the symbol and hold for 3 seconds to reset the filter timer.
Be careful when handling the filters after the regeneration process: risk of burns!
Do not put food or other objects in the oven with the filters during the regeneration cycle. Once
the cycle is done, leave the oven with the door open and wait one hour before using it again.