Reset
Press below the symbol
and hold for 3 seconds
4.29 Carbon filter state
indication (recirculation
mode only)
The hood touch control includes a filter timer that reminds that is important to clean
the hood’s carbon filter on a regular basis (every 100 hours).
The filter run time is always counted when the fan is running, even during after-run.
After the time has elapsed the symbol
on the hood touch control lights up.
Reset
Press below the symbol
and hold for 3 seconds
16
OPERATION
EN
4.30 Power limitation
setting
Value
Max. power level consumption [kW]
0
(default)
10.4 (max power)
1
1
2
1.5
3
2.8
4
3.5
5
3.7
6
4.5
7
6
The appliance is generally configured to the maximum available power, shown in the
technical data table. However, an operating mode with power limitation can be set.
In this way, the maximum power supplied by the hob is limited to a fixed value.
The power limitation setting must ONLY be performed by a
specialized technician.
To set the power limitation, do the following:
Connect the hob to the power supply.
Within two minutes, access the Service Menu by simultaneously pressing the
and keys until you hear an acoustic signal.
Press the two sliders that brighten up onthe right side of the hob until you
hear a second beep. The “Timer” display shows [CF6].
x
Use slider control (left end
Æ
-, right end
Æ
+) to select the desired power level. The
selected level is shown on the display of a cooking zone. The correspondence
between the power levels and limitation values are shown in the table below.
x
To confirm the selection and leave the Service Menu, press and keys
simultaneously.
x
To leave the Service Menu without making changes, press
Press the
key. The "Timer" display shows [PHA].
WARNING! The power level must be selected according to the fuse
installed
Power level chart
8
7.4
Summary of Contents for Nivel Pro
Page 1: ...NIVEL PROFESSIONAL Operating Instructions...
Page 2: ......
Page 26: ......
Page 27: ......
