VS-EIU-100X User Manual
Proprietary and Confidential to OpenVox Communication Co.,Ltd
53
7.4.2 Configuring gateway
Usually, the feature is disabled before being on sale. To activate the auto provisioning function, please
follow the procedures as below.
Step 1
On the
ADVANCED
->
Auto Provision interface
Step 2
Enable the ‘Enabled’ option and select ACS. DHCP option 66 can be enabled if ACS has been work
as DHCP server, otherwise please select protocol of provisioning and fill the value of ‘
Auto Config Server
URL
’. Username and password may need to be filled in FTP/HTTP for the purpose of system safety. Do not
forget to select Firmware upgrade, upgrade mode and fill the value of timeout, and click ‘
Save
’
.
Step 3
Set interval of checking in
LOGS
->
System notice
then enable it, and click ‘
Save
’
.
Table 7-4-1 Definition of Auto Provision
Options
Definition
Enabled
Whether to enable or disable Auto Provision
DHCP Option 66
Get ACS server address from Option 66 via DHCP
Protocol
Set protocol of connection
Auto Config Server URL
The config server domain or IP address
User Name
The account of downloading from ACS
Password
The password of downloading from ACS
Timeout
The max limit time for downloading firmware
Firmware Upgrade
Enable/disable the mode of downloading firmware
Upgrade Mode
Select upgrade time.
Power: start upgrade configuration when Power on. Power + Period:
Set the frequency of checking the latest configuration when gateway
running
Table 7-4-2 Definition of system notice
Options
Definition
Enable
Whether to enable or disable system notice
Check Interval
When Upgrade Mode is set, this parameter specifies the interval of Checking.