VS-EIU-100X User Manual
Proprietary and Confidential to OpenVox Communication Co.,Ltd
30
Hostname or IP Address
IP address or hostname of the endpoint or 'dynamic' if the endpoint has a
dynamic IP address. This will require registration. Notice: if the input here
is hostname and your DNS has changed, you must reboot asterisk.
Transport
This sets the possible transport types for outgoing. Order of usage, when
the respective transport protocols are enabled, is UDP, TCP, TLS. The first
enabled transport type is only used for outbound messages until a
Registration takes place. During the peer Registration the transport type
may change to another supported type if the peer requests so.
NAT Traversal
Addresses NAT-related issues in incoming SIP or media sessions.
4.1.3 Advanced Registration Options
Table 4-1-2 Definition of Registration Options
Options
Definition
Authentication User
A username to use only for registration.
Register Extension
When Gateway registers as a SIP user agent to a SIP proxy (provider), calls
from this provider connect to this local extension.
From User
A username to identify the gateway to this endpoint.
From Domain
A domain to identify the gateway to this endpoint.
Remote Secret
A password which is only used if the gateway registers to the remote side.
Port
The port number the gateway will connect to at this endpoint.
Qualify
Whether or not to check the endpoint's connection status.
Qualify frequency
Frequency
How often, in seconds, to check the endpoint's connection status.
Outbound Proxy
A proxy to which the gateway will send all outbound signaling instead of
sending signaling directly to endpoints.
4.1.4 Call Settings
Table 4-1-3 Definition of Call Options
Options
Definition
DTMF Mode
Set default DTMF Mode for sending DTMF. Default: rfc2833.
Other options: 'info', SIP INFO message (application/ dtmf-relay);
'Inband', Inband audio (require 64kbit codec - alaw, ulaw).
Trust Remote-Party-ID
Whether or not the Remote-Party-ID header should be trusted.
Send Remote-Party-ID
Whether or not to send the Remote-Party-ID header.
