Opengear MFC-8322-S, User Manual

Page: 47 / 72

MFC-8322-S and MFC-OG3-N User Manual (Iss. 01) DashBoard Menus • 6–7
Setup Tab
Table 6.5 summarizes the Setup options available in DashBoard for the Network Controller
Cards.
Table 6.5 Setup Menu Items
Menu Title Item Parameters Description
Setup
Fans Installed
a
a. This option is read-only when the frame door is closed.
Selected*
Alarms are displayed in the Frame Status
field of the Hardware tab
Cleared
No alarms are displayed in the Frame
Status field of the Hardware tab
Fan Speed
Auto*
Card automatically controls the cooling
fan speed of the frame for optimum
cooling
Max Frame fans always run at maximum speed
Notify on Card Fault
Selected*
Card displays an alarm in DashBoard and
the
FAULT LED lights solid red on the
frame when a fault condition is reported
by a card in the frame
Cleared Disables this feature
Notify on PSU#
Missing
b
b. This item is only available when using an MFC-OG3-N.
Selected
An alarm condition is flagged if the
corresponding power supply is not
present. The alarm appears in DashBoard
via SNMP (MFC-OG3-NS only), and via
the LCD Diagnostic Panel
Cleared*
Disables the PSU Status alarm for the
specified frame power supply.
Licensable Features
Indicates if the software key for any
licensable features is installed
Factory Settings
c
c. This option is labeled as Factory Defaults when using an MFC-8322-S.
Restore
Defaults all the values in the Setup tab
only. Refer to the sections below for
details.
Card Slot Names -
Slot #
d
d. This field is not applicable when using an MFC-8322-S.
#
Configures the name displayed in
DashBoard for the specified slot.