MFC-8322-S and MFC-OG3-N User Manual (Iss. 01)
Installation • 2–9
Enabling SNMP Support
Certain versions of the MFC-OG3-N provides optional support for remote monitoring and control
of your frame and openGear cards using SNMP (Simple Network Management Protocol), which
is compatible with many third-party monitoring and control tools. Refer to the section “
on page 1-2 for a list of cards that support SNMP.
Enabling SNMP Support
The SNMP monitoring and control feature for your MFC-OG3-N is a software option that is field
upgradable using DashBoard.
To enable SNMP support using the SNMP tab in DashBoard
1.
Ensure that you have configured the network settings for your card as outlined in the
section “
2.
In DashBoard, display the
Device
tab of the card by double-clicking its status indicator
in the
Basic Tree View
.
3.
From the
Device
tab, select the
Setup
tab.
4.
In the
Licensable Features
area, make a note of the information displayed in the
SNMP
Request Code
field.
5.
Contact Ross Video Technical Support.
• When you speak to the Technical Support representative, tell them your name, your
facility name, and the
SNMP Request Code
displayed in the
Setup
tab.
• You will be given a
License Key
that must be entered in the
SNMP Feature Key
field of the
Setup
tab.
6.
Enter the
License Key
in the
SNMP Feature Key
field.
7.
When the installation is complete, verify that the
Setup
tab displays “
Licensed
” in the
SNMP Feature
field and that the
SNMP
tab is now available in the
Device View
.
Configuring the SNMP Agent using DashBoard
The SNMP agent on the frame will accept SNMP GET and SET requests on the default SNMP
port (161), using SNMP version 1 or SNMP version 2c. The SNMP Agent will send SNMP traps
to one or more notification targets, with user-configurable address, port, and protocol version
number.
To configure your SNMP Agent via DashBoard
1.
In DashBoard, display the
Device
tab of the card by double-clicking its status indicator
in the
Basic Tree View
.
2.
From the
Device
tab, select the
SNMP
tab.
Note
— The MFC-8322-S does not support SNMP.
Note
— If SNMP is enabled on an MFC-OG3-N, it will perform as an MFC-OG3-NS
although DashBoard and SNMP still display MFC-OG3-N.
Summary of Contents for MFC-8322-S
