Opengear MFC-8322-S, User Manual

Page: 44 / 72

6–4 • DashBoard Menus MFC-8322-S and MFC-OG3-N User Manual (Iss. 01)
Hardware Tab
Table 6.3 summarizes the read-only information displayed in the Hardware tab.
Table 6.3 Hardware Tab Items
Tab Title Item Parameters Description
Hardware
Frame status
OK (Green)
Indicates the status of the frame, frame
power supplies, and/or cards in the frame
Running a backup code
(Yellow)
a
Fan door open (Red)
PSU fuse blown (Red)
PSU fault (Red)
Frame Power >350W
(Red)
c
PSU fan stalled (Red)
Card Fault (Red)
PSU AC missing
(Red)
b
PSU power off (Red)
Ref card missing (Red)
Mid-Plane ID # Indicates the board issue
Audio Alarm
Enabled
Indicates that the Alarm Config jumper is
set to enable audio alarms
Disabled The Audio Alarm is disabled
Voltage (mV) # Supply Voltage
Current (mA) # Current consumption of the card
Negative Rail (mV) # Indicates the negative voltage of the card
Fan Speed
#
Indicates the fan
speed of the frame
This alarm is set
using the Fan
Speed option in the
Setup tab.
x / y
Current Speed (x) /
Maximum Speed (y)
Fan Door
Open
Indicates the state of the fan door
Closed
PSU# Status
c
Present (Green)
Indicates the specified frame power supply
is installed in the frame and the
corresponding
Notify on PSU Missing
alarm is may or may not be enabled on the
Setup tab.
Not Present (Green)
Indicates the specified frame power supply
is not installed, but the corresponding
Notify on PSU Missing alarm is disabled
on the Setup tab.