_____________________________________________________________________________
IP POWER PAGE 11 OF 32
•
Fill in the fields as follows:
IP9258 Address: The IP Power’s IP address
HTTP Port: The port of the IP Power control web pages – this will be
80
unless you have changed it
Username:
admin
Password: The IP Power admin password (default
12345678
)
Power Number: The OUT power outlet the PC/server is connected
through – if many PC/servers are connected through the one power
outlet and are registered with the same IP Power unit, they will all
be shutdown at the same time
•
Click
Save Change
,
Install Service
then
Start Service
. Restart the PC/server, then
it will be enabled for software shutdown.
5. IP Power Control Using Browser
To access the IP Power control web pages simply type the IP address of the
IP Power into your web browser’s address field.
_____________________________________________________________________________
IP POWER PAGE 12 OF 32
The username is
admin
and the default password is
12345678
. Enter these
credentials, or the password you have set. Click
OK
to enter the IP Power
control web pages.
Control the power supply by outlet
IP Power 9258 can control 4 outputs individually or at the same time:
•
Select the
Set Power
from the left hand menu
•
You can choose to power off and power on an outlet. You may also set the
time to delay before performing the chosen action under
Timer
, by entering the
time to delay in seconds and selecting
On
.
Querying the power state of the outlets
Click
Set Power
again to refresh the status. The state of each power outlet is
displayed under the
Control
column
