_____________________________________________________________________________
IP POWER PAGE 9 OF 32
•
Click
IP 9258
in the left of the window and the IP Power’s name and IP address
will display in the right hand fields. You can rename the IP Power or change its
IP address or default gateway address. Click
Update
to apply the new settings.
The new settings will be working in 20 seconds.
•
Double click the name of the IP Power, and your browser window will open and
connect to the unit automatically. Alternately, manually type the IP address of
the IP Power into your browser.
NOTE
The IP Power 9258’s default IP address is
192.168.0.50
and its subnet mask is
255.255.255.0
.
The IP address of your computer should be in the same subnet with that of IP Power’s (by default
this subnet is
192.168.0.xxx
), so that you can access the IP Power control web pages.
Typically, you will want to find out the IP address of your PC and set the IP Power to reside on the
same subnet. To find out the IP address of your PC:
•
Select
Start
Run
then type in
cmd
in the MS-DOS window, type in
ipconfig
_____________________________________________________________________________
IP POWER PAGE 10 OF 32
•
The IP address of the PC is
192.168.100.31
, so the IP Power has been set to
192.168.100.168
. Both of these addresses are on the
192.168.100.xxx
subnet.
Alternately you may change the PC’s IP address to be on the same subnet as the IP Power (by
default
192.168.0.50
), in
Control Panel
Network Connections
Local Area Connection
Properties
Internet Protocol (TCP/IP) Properties.
The default username and password of IP Power 9258 are:
Username:
admin
Password:
12345678
PC or server software shutdown
The IP Power 9258 can also safety shutdown a PC or server through the network
before being powered off. This allows you to remotely shut down a PC/server
attached to IP Power 9258 using the usual Windows safe shutdown procedure.
Before using the software shutdown function, please note:
•
You will need to install the
IP9258service.exe
program from the IP Power CD as
detailed below
•
If you are running programs such as Microsoft Office the safe shut down may
not automatically save open documents or files which may result in lost data.
•
To allow enough time for the PC/server to safely shut down before being
powered off, please set the delay time at 30 or 60 second on the IP Power
control web pages
Setup
Delay Switch
.
•
The PC/server to shut down must be on the same Ethernet network and on
the same subnet as the IP Power.
Installing
IP9258service.exe
•
Insert the IP Power CD in the PC/server which is to be enabled for software
shutdown
•
Install the
IP9258config.exe
, by selecting the
SDK
button on the LHS then
selecting
9258 SDK
in the menu. Then double click Shutdown Program and run
IP9258config.exe.
On the install menu select the LHS bottom button to place
the
IP9258Service
icon on your desktop. Click this icon then select the
IP9258config.exe
program
