_____________________________________________________________________________
IP POWER PAGE 1 OF 32
QUICK START & USER MANUAL
opengear
IP Power 9258
Quick Start
…… 2
User Manual
…… 5
Rev: 1.2
July 10, 2009
_____________________________________________________________________________
IP POWER PAGE 2 OF 32
Quick Start Guide
1)
Check kit contents
Part # 508000 IP Power 9258T (USA) or
Part # 508001 IP Power 9258S (Europe/Australia)
User Manual/Quick Start Guide and IP Power CD
Power cable
2)
Install hardware
Connect power cables. For the USA model (NEMA5-15P 100-120V outlets), the
individual max output current per outlet is 6A and the total max output current
for the 4 outlets is 15A. Use a power IN cable with 15A current rating and use
power OUT cables with 10A rating for each power outlet
For the European/Australian model (IEC320-C13 220-250V outlets) the
individual max output current per outlet is 6A and the total max output current
for the 4 outlets is 10A. Use a power IN cable with 10A current rating and use
power OUT cable with 10A rating for each power outlet
Connect IP Power
NETWORK
port to your local
10/100 LAN
3)
Set IP Power IP address
The IP Power’s default network settings are:
IP address:
192.168.0.50
Subnet mask:
255.255.255.0
To set a new address, either:
Connect your PC directly to the IP Power’s
Ethernet (
NETWORK
) port and run
IPEdit.exe
.
You first must copy the IPEdit.exe program
from the IP Power CD on to your PC; or
With a PC in the same subnet as the IP Power (i.e. IP address of
192.168.0.xxx) open the IP Power control web pages as detailed in the
next step and select
System: Setup
