Opengear 9450GT, Product Manual

Page: 24 / 50

3-2
••••
9450GT Setup Fiber Ethernet Switch Transceivers Product Manual
(Product Manual)
9450GT Overview
The 9450GT series provide a two fiber, and four copper (RJ45) Ethernet ports. This gives you
five links (one fiber and four RJ-45) plus the Internal Link interface. Each card uses a standard
SFP with an FP 1310nm laser and PIN receiver. High power and CWDM transmitters are
available, as is a high sensitivity receiver.
The 9450GT series requires the Rear Module which includes one LC duplex connector and four
RJ-45 connectors.
Table 3.1 9450GT Series — Models
Model Descripti
9450GT-20KM-LC
Dual Fiber 20km 1310nm transmitter and wideband receiver
9450GT-40KM-LC
Dual Fiber 40km 1310nm transmitter and wideband receiver
9450GT-80KM-LC
Dual Fiber 80km 1550nm transmitter and wideband receiver
CWDM and High Sensitivity Models
Options are also available with Coarse Wavelength Division Multiplexing (CWDM) transmitters,
with a standard or high sensitivity receiver. The high sensitivity models are indicated with an H in
the model number (e.g. 9450GT-27H). The CWDM models are identified with a two digit suffix
as indicated in Table 3.2 The wavelength for each model are also indicated.
Table 3.2 9450GT — Operating Wavelengths
Model Transmit Wavelength
9450GT-CWDM-27-LC
1270nm
9450GT-CWDM-29-LC
1290nm
9450GT-CWDM-31-LC
1310nm
9450GT-CWDM-33-LC
1330nm
9450GT-CWDM-35-LC
1350nm
9450GT-CWDM-37-LC
1370nm
9450GT-CWDM-43-LC
1430nm
9450GT-CWDM-45-LC
1450nm
9450GT-CWDM-47-LC
1470nm
9450GT-CWDM-49-LC
1490nm
9450GT-CWDM-51-LC
1510nm
9450GT-CWDM-53-LC
1530nm
9450GT-CWDM-55-LC
1550nm
9450GT-CWDM-57-LC
1570nm
9450GT-CWDM-59-LC
1590nm
9450GT-CWDM-61-LC
1610nm