Opengear 9450GT, Product Manual

Page: 42 / 50

4-14
••••
Configuration Fiber Ethernet Switch Transceivers Product Manual
(Product Manual)
Port Stats Tab
Table 4.4 summarizes the read-only information displayed in the Port Stats tab.
Note
— The number of RJ45 and Fiber Link Status fields in the Port Stats tab is
dependent on your card model.
Table 4.4 Port Stats Tab Items
Menu Title Item Parameters Description
RX Packets #
Reports the number of good packets
received by the specified port
This number also includes the number of
packets received by the specified port that
are greater than the standard maximum
size and less than or equal to the jumbo
packet size, regardless of CRC or
alignment errors
RX Errors #
Reports the number of packets received by
the specified port that have either an FCS
error or an alignment error
RX Dropped #
Reports the number of good packets
received by the specified port but were
dropped due to a lack of resources or other
reasons
TX Packets #
Reports the number of good packets
transmitted by the specified port
TX Dropped #
Reports the total number of transmit
packets that are dropped due to a lock of
resources or other reasons
RJ45 # Stats,
Fiber # Stats,
Internal Stats
TX Collisions #
Reports the number of collisions
experienced by the specified port during
packet transmissions
#
Specifies how often the status fields in the
Port Stats tabs are updated
Refresh Rate
Refresh Rate
Disabled* Disables this feature