Names and functions of parts
10
Rear
REMOTE CONTROL jack:
An Onkyo product with
RI jack can be connected and synchronized with this
unit.
FM 75
h
and AM ANTENNA terminals:
The supplied
antennas are connected.
ETHERNET port:
Connect to the router with an
Ethernet cable.
Power cord:
Connect the power cord to an AC outlet.
Disconnect the power cord only after putting the unit
into standby mode.
*
Turning on the unit may cause a momentary power surge that
might interfere with other electrical equipment on the same
circuit. If this is a problem, plug the unit into a different branch
circuit.
DIGITAL IN OPTICAL/COAXIAL terminals:
Connected to players. Use a digital optical cable or
digital coaxial cable for connection with the digital
audio output jack of a player.
GND terminal:
Connect if the record player has a
ground wire.
LINE IN terminals:
Connected to players. Use an
RCA cable for connection with the LINE OUT terminal
of a player.
LINE OUT terminals:
Use when connecting recording
devices, such as a cassette tape deck. Use an RCA
cable to connect to the LINE IN terminal on a recording
device.
SUBWOOFER PRE OUT jack:
Connect a subwoofer
with a built-in amplifier to amplify bass output.
SPEAKERS A/B terminals:
You can connect a set of
left and right speakers to each of the A/B terminals.
TX-8130_mst.book 10 ページ 2015年11月2日 月曜日 午後1時16分