background image

4

Precautions

1. Recording Copyright

—Unless it’s for personal use 

only, recording copyrighted material is illegal without 
the permission of the copyright holder.

2. AC Fuse

—The AC fuse inside the unit is not user-

serviceable. If you cannot turn on the unit, contact your 
Onkyo dealer.

3. Care

—Occasionally you should dust the unit all over 

with a soft cloth. For stubborn stains, use a soft cloth 
dampened with a weak solution of mild detergent and 
water. Dry the unit immediately afterwards with a clean 
cloth. Don’t use abrasive cloths, thinners, alcohol, or 
other chemical solvents, because they may damage 
the finish or remove the panel lettering.

4. Power

WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST 
TIME, READ THE FOLLOWING SECTION 
CAREFULLY.
AC outlet voltages vary from country to country. Make 
sure that the voltage in your area meets the voltage 
requirements printed on the unit’s rear panel (e.g., AC 
230 V, 50 Hz or AC 120 V, 60 Hz).

The power cord plug is used to disconnect this unit 
from the AC power source. Make sure that the plug is 
readily operable (easily accessible) at all times.

For models with [POWER] button, or with both 
[POWER] and [ON/STANDBY] buttons:
Pressing the [POWER] button to select OFF mode 
does not fully disconnect from the mains. If you do not 
intend to use the unit for an extended period, remove 
the power cord from the AC outlet.

For models with [ON/STANDBY] button only:
Pressing the [ON/STANDBY] button to select Standby 
mode does not fully disconnect from the mains. If you 
do not intend to use the unit for an extended period, 
remove the power cord from the AC outlet.

5. Preventing Hearing Loss

Caution

Excessive sound pressure from earphones and 
headphones can cause hearing loss.

6. Batteries and Heat Exposure

Warning

Batteries (battery pack or batteries installed) shall not 
be exposed to excessive heat as sunshine, fire or the 
like.

7. Never Touch this Unit with Wet Hands

—Never 

handle this unit or its power cord while your hands are 
wet or damp. If water or any other liquid gets inside 
this unit, have it checked by your Onkyo dealer.

8. Handling Notes

0

If you need to transport this unit, use the original 
packaging to pack it how it was when you originally 
bought it.

0

Do not leave rubber or plastic items on this unit for a 
long time, because they may leave marks on the 
case.

0

This unit’s top and rear panels may get warm after 
prolonged use. This is normal.

0

If you do not use this unit for a long time, it may not 
work properly the next time you turn it on, so be 
sure to use it occasionally.

For British models

Replacement and mounting of an AC plug on the power 
supply cord of this unit should be performed only by 
qualified service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance 
with the following code:

Blue:  Neutral
Brown:  Live

As the colours of the wires in the mains lead of this 
apparatus may not correspond with the coloured 
markings identifying the terminals in your plug, proceed 
as follows: The wire which is coloured blue must be 
connected to the terminal which is marked with the letter 
N or coloured black. The wire which is coloured brown 
must be connected to the terminal which is marked with 
the letter L or coloured red.

IMPORTANT

The plug is fitted with an appropriate fuse. If the fuse 
needs to be replaced, the replacement fuse must 
approved by ASTA or BSI to BS1362 and have the same 
ampere rating as that indicated on the plug. Check for the 
ASTA mark or the BSI mark on the body of the fuse. If the 
power cord’s plug is not suitable for your socket outlets, cut 
it off and fit a suitable plug. Fit a suitable fuse in the plug.

For European Models

Declaration of Conformity

We declare, under our sole 
responsibility, that this product 
complies with the standards:

– Safety
– Limits and methods of 

measurement of radio 
disturbance characteristics

– Limits for harmonic current 

emissions

– Limitation of voltage changes, 

voltage fluctuations and flicker

– RoHS Directive, 2011/65/EU

WEEE

http://www.onkyo.com/manual/weee/weee.pdf

TX-8130_mst.book  4 ページ  2015年11月2日 月曜日 午後1時16分

Summary of Contents for TX-8130













































Reviews: