Onkyo DR-815 Instruction Manual Download

Page: 13 / 84

Part Names and Functions

—Continued

The page numbers in parentheses show where you can find the main explanation for each item.

TAPE/HDD IN/OUT (21)

This analog audio input and output are for connect-
ing a recorder with an analog audio input and output
(cassette, Mini Disc, etc.). If you want to connect
Onkyo RI Dock, connect the RI Dock output with
the TAPE/HDD IN terminal.

LINE/TV IN (22)

These terminals are for connecting audio output of
external devices such as TV, DVD or turntable with
a built-in phono equalizer.

FM ANTENNA (16, 17)

This jack is for connecting an FM antenna.

AM ANTENNA (16,17)

These push terminals are for connecting an AM
antenna.

FRONT SPEAKERS (18)

These terminals are for connecting speakers.

AV CONNECTOR (20)

This SCART output can be connected to a TV or
projector with a SCART input. This SCART con-
nector outputs composite video, S Video, and RGB
video.

VIDEO OUT VIDEO (20)

This RCA connector can be used to connect a TV or
projector with a composite video input.

VIDEO OUT S VIDEO OUT (20)

This connector can be used to connect a TV or pro-
jector with an S Video input.

PRE OUT (22, 23)

These terminals are for connecting a power ampli-
fier.

SUBWOOFER CONTROL

This terminal is provided for future use with Onkyo
subwoofer equipped with SUBWOOFER CON-
TROL terminals.
No product is available as of July 2006.

REMOTE CONTROL (21)

This

(Remote Interactive) jack can be con-

nected to an

jack on another Onkyo AV compo-

nent. The DVD receiver’s remote controller can
then be used to control that component. To use

you must make an analog audio connection (RCA)
between the DVD receiver and the other AV compo-
nent.

Rear Panel

G
8

See pages 16-23 for connection information.

Summary of Contents for DR-815





















































































Search results

Summary of Contents for DR-815

Reviews:

Related manuals for DR-815

Brands by name

Popular brands

Onkyo DR-815, Instruction Manual

Search results

Summary of Contents for DR-815

Reviews:

Related manuals for DR-815

Brands by name

Popular brands