17
Playing CDs
1
Press the CD receiver’s [
0
] button to open
the disc tray.
Tip:
• Pressing the [
0
] button while the CD receiver is on
Standby will turn on the CD receiver and open the disc
tray.
2
Place CD on the tray with the label-side
facing up.
Place 8 cm CDs in the center of the tray.
3
To start playback, press the CD receiver’s
[
1
/
3
] button.
Alternatively, press the remote controller’s [
1
/
3
] button.
The disc tray closes and playback starts.
Then the “
1
” indicator appears.
To stop playback:
Press the [
2
] button.
To pause playback:
Press the [
1
/
3
] button. The Pause “
3
” indicator
appears. To resume playback, press the [
1
/
3
] button
again.
To Fast-Forward or Fast-Reverse:
During playback, press and hold the Fast Forward [
4
]
button to fast forward, or the Fast Reverse [
5
] button
to fast reverse.
To remove the CD:
Press the CD receiver’s [
0
] button to open the disc tray.
■
Information Displayed When Playback is
Stopped:
Selecting Tracks
To return to the beginning of the track currently playing,
press the Previous [
7
] button.
Press the Previous [
7
] button repeatedly to select
earlier tracks.
Press the Next [
6
] button repeatedly to select
subsequent tracks.
During playback or while playback is paused, press the
[DISPLAY] button repeatedly to display the following
CD information.
• Elapsed time
• “REMAIN”
Lights up while the remaining track time is being
displayed.
• “TOTAL REMAIN”
Lights up while the remaining disc time is being
displayed.
• Type of CD
This section describes the procedure for using the
remote controller, unless otherwise specified.
Playing CDs
CD „„ „„19„† „„67„‡29
“DISC TOTAL” lights up
• Audio CD
Total number of tracks
Total playing time
Displaying CD Information
