Onix T624W100DA2b, Instruction Manual

Page: 1 / 16

Quick Start Guide - Heated Throw
This is a Quick Start Guide Only. It is Important that you read the
Instructions fully for Safety and Correct operation of your product. Failure to
do so may result in Damage or Personal Injury.
1 2
Ensuring there are no creases or folds, wrap
the Heated Throw around your body or drape
over your legs.
Ensure the Controller is on the outside of the
Throw. DO NOT COVER the controller
Ensure the detachable plug on the Throw is
fully inserted and locked.
Allow cables to hand freely. DO NOT BEND,
KINK, TRAP or PINCH the cables.
DO NOT Sleep while using this product.
DO NOT use this product as an electric under
or over blanket.
DO NOT use in bed.
Fully unravel the cables and Insert Plug into
Power Point and switch on.
3 4
Heat Settings
0 = Off
1 = Low Heat
2 = Medium Heat
3 = High Heat
0 = Off
DO NOT Sleep while
using this product.
DO NOT use on heat
setting 3 continuously.
Turn down to setting 2
or 1 when warm enough
Controller will turn of
automatically after
approx. 3 hours.
Do not leave unattended when switched on.
Turn the heat setting to position “O” (off) then
Turn power off and Unplug at the wall.
Always Unplug when not in use
Store in dry place when finished.
Refer to “Recommended Cleaning
Instructions” section for directions on
cleaning the product.
DO NOT COVER CONTROLLER
When using the Throw, some people may be susceptible to a tingling sensation when alone or
when touching someone else using the Throw.
This “Tingling” feeling is known as an “electric field effect” and is occasionally known to happen
across all makes and brands of Throws. It is caused by the current flowing through the element
creating an Electromagnetic Field (EMF). Some people are more susceptible to feeling this EMF
tingling sensation than others. This is no cause for concern and is in no way an electric shock.
0
3
2
1
0