15
After Sales Support
Telephone:
1300 886 649
Email:
Operations (Cont.)
Channel scanning
Channel scan performs searches for active signals in an endless loop of
channels.
• Press the MENU button
six time
s (6x) until the SC, channel number and
CTCSS number icons start blinking on the LC display.
• Press the
or
button to activate the channel scan mode. The
channel number on the LC display changes rapidly until an active signal
is detected. When an active signal is detected, the channel scan pauses
on the active channel.
CTCSS code scanning
• Press the
MENU
button
seven times
(7x) until the SC icon is displayed
and the CTCSS code starts blinking on the LC display.
• Press the
or
button to start the CTCSS code scanning.
DCS code scanning
• Press the
MENU
button
eight time
s (8x) until the SC icon is displayed
and the DCS code starts blinking on the LC display.
• Press the
or
button to start the DCS code scanning.
Memory scanning
• Press the
MENU
button
nine times
(9x) until the MEM icon is displayed.
• Press the
or
button to start memory scanning.
Call tone setting
The unit is equipped with five user-selectable call tones. To set the desired
call tone:
• Press the
MENU
button
ten times
(10x) until the C is displayed and call
tone code starts blinking.
• Press the
or
button to select the desired call tone from the five
options.
• Press the
C
(Call) button to transmit the call tone.
• A call tone can only be transmitted once (not more than three seconds) in
any 60 second period, no matter how often you press the
C
(Call) button.