14
After Sales Support
Telephone:
1300 886 649
Email:
Operations (Cont.)
• To communicate between two or more radios, both the channel and
CTCSS code selections must be the same.
• To communicate with other models and brands of radios, the actual radio
frequency and CTCSS frequency must be matched.
• CTCSS codes on emergency channels 5 and 35 are prohibited.
DCS code setting
The radio has 83 DCS private codes available. Different DCS tones may be
associated to different channels. To choose the desired DCS code:
• Press the
MENU
button
twice
(2x) until the DCS code number blinks on
the LC display: the DCS code indicates that no DCS tone is programmed
on that channel.
• Press the
or
button to select the desired DCS code number.
• Press and hold the
or
button to move faster through the selection.
• DCS codes on emergency channels 5 and 35 are prohibited.
Hi/Low power setting
This feature permits the selection of the transmitting power level. To select
the desired power output 5W:
• Press the
MENU
button
three times
(3x) before voice transmission.
VOX sensitivity level setting
In VOX mode, the unit will transmit a signal only when it is activated by your
voice or other sounds around you. The unit will transmit for a further second
even if you stop talking. To set the VOX sensitivity level:
• Press the
MENU
button
four times
(4x): the VOX icon will display and the
current VOX level will start blinking on the LC display.
• Press the
or
button to select the VOX level sensitivity. The highest
sensitivity level is 5.
Memory setting
• Press the
MENU
button
five times
(5x) until the MEM icon is displayed
and the channel number is blinking.
• Press the
or
button to select the desired channel, then press the
TW
button to confirm it. A maximum of 20 channels can be stored.
