23
After Sales Support
Telephone:
1300 886 649
Email:
Installation (Cont.)
Connecting the power leads
Connect the (supplied) power cable to the power socket at the back of the
CB radio.
The red wire is typically connected to a (switched) accessory 12v fuse in the
fuse box.
Connect the black lead to the negative side of the automobile. This is usually
the chassis. Any convenient location with good electrical contact (remove
paint) may be used.
Alternatively, the wires can be connected directly to the battery.
Connect the red wire to (+) and the black wire to (-).
NOTE:
• 13.8 VDC is required to operate
the CB radio.
• The main power lead (red) has a
two amp fuse in its holder. Use
only the specified type and size
fuse for maximum protection.
Failure to do so will void the
warranty.Conventional mounting
with double-sided tape
WARNING
This unit must be installed by a professional technician only or the
warranty will be void.