10
After Sales Support
Telephone:
1300 886 649
Email:
Operations
Turning the radio on
• Rotate the
Power/Volume
knob clockwise to turn the unit on and adjust
the volume, it will then go into self-inspection mode. A series of tones
will indicate the radio is on and the full screen will be displayed for one
second.
• When the radio is turned on for the first time, the following default
parameters will be selected:
Parameter
Default
Channels
1
CTCSS privacy codes
0
DCS privacy codes
0
SQ levels
Auto
TX power
5W
VOX on/off
Off
Call tone
5
Roger tone
On
Key tone
On
Lock states
Unlock
Turning the radio off
• Rotate the
Power/Volume
knob anticlockwise to turn the radio off.
Adjusting the volume
• Rotate the
Power/Volume
knob to change the volume.
Selecting a channel
Before selecting a channel for transmission, always listen on it and ensure it is
not already being used. Avoid selecting a busy channel. When the unit keeps
on receiving a signal from an unknown party, the RX icon will be displayed.
• Press the
or
button once to select the desired channel (1 - 80)
• Press and hold the
or
button to move faster through the selection.