Onicon FT-3100, Programming Manual

Page: 34 / 36

FT-3100 TRANSMITTER PROGRAMMING GUIDE
ONICON Incorporated 727.447.6140 Page 34 onicon.com
Reset Total Forward (+) Totalizer [T+ reset]
Reset Partial Forward (+) Totalizer [P+ reset]
Reset Total Reverse (-) Totalizer [T- reset]
Reset Partial Reverse (-) Totalizer [P- reset]
Load Factory Default Sensor Body Settings [Load Sens.f.def]
Load Factory Default Transmitter Settings [Load Conv.f.def]
To reset the following totals or reload factory defaults, press enter to access
the function and use the escape (ESC) key to confirm. Press enter to accept the
change and exit the function. Press escape to exit the program mode. Table of
Contents
This function resets the total forward (+) totalizer.
This function resets the partial forward (+) totalizer.
This function resets the total reverse (-) totalizer.
This function resets the partial reverse (-) totalizer.
This function loads the factory default operating parameters for the sensor body.
Note: Reloading these values will void the factory calibration.
This function loads the factory default operating parameters for the sensor body.
Reset Total Forward (+) Totalizer
[T+ reset]
Reset Partial Forward (+)
Totalizer
[P+ reset]
Reset Total Reverse (-) Totalizer
[T - reset]
Reset Partial Reverse (-)
Totalizer
[P - reset]
Load Factory Default
Sensor Body Settings
[Load Sens.f.def]
Load Factory Default
Transmitter Settings
[Load Conv.f.def]
3.9 MENU 11 - FUNCTIONS