Setup and Installation
ONePlus UPS User Instruction Manual
9
• If the circuit breaker trips with nothing plugged
into the output receptacles, there may be an
internal problem with the UPS. Call ONEAC
Technical Services for assistance (refer to
page 1).
Setup and
Installation
Before shipment, this product was tested, inspected
and found to be free of mechanical and electrical
defects. Upon receipt of your UPS, carefully
examine the packing containers for any sign of
physical damage. Notify the carrier immediately if
damage is present. After inspecting, carefully
unpack the UPS. Retain the packaging materials for
reuse or dispose of the materials properly, see Return
Procedure on page 30. Once unpacked, inspect and
test the unit for hidden damage that may have
occurred in transit. If damage is evident, contact
ONEAC Technical Services.
Installation
When selecting a location for your UPS, be sure that
the unit is near a properly wired AC electrical outlet
and is easily accessible for all other connections (the
loads and/or optional communications cable). Leave
at least 2 inches of clearance on each side of the UPS
for proper ventilation.
CAUTION:
Do not cover or install the UPS in a
confined or enclosed space.
Choose an area that is clean and dust-free. If the
environment is dusty, clean the outside of the unit
with a vacuum cleaner.
For optimal battery life, keep the UPS at an ambient
temperature of 25°C (77°F).
Long Term
Storage
Improper long-term UPS storage may damage the
UPS battery and invalidate the battery warranty.
Unplugging a UPS from its AC utility power source
for an extended period of time results in lost battery
charge. Restoration of charge to maximum capacity
requires 24 - 48 hours.
Inspection and
Unpacking
