One World Touch MP1200, Service Manual

Page: 55 / 110

Service Manual version 1008
MP1200/MP1500 (PC920 Intel 945G)
5-47
(10)
FMS 3*5 (4)
(11)
(12)
FMS 3*5 (9)
(13)
FMS 3*5 (2)
(14)
(15)
FMS 3*8 (7)
5.2.9.7. Power Supply Integration
21. Integrate the power supply module (10) to the
PC’s chassis and retain them together with three
FMS M3*5 screws.
22. Connect the power switch cable to CN4 on the
motherboard.
23. Plug the ATX 10P*2 power cable to the ATX
power connector, ATXP1 on the motherboard.
24. Plug the ATX12V 2P*2 power cable to the
ATX12V power connector, ATXP2 on the
motherboard.
25. Connect the big 4-pole end of the power cable to
the HDD.
26. Connect the small 4-pole end of the power cable
to the CD-ROM board.
5.2.9.8. Riser Card Integration
27. Have the riser card module (11) firmly plugged to
the ESIA slot on the motherboard.
5.2.9.9. I/O Cover Integration
28. Plug the I/O module (12) to the IOINF1 slot on the motherboard
and retain it to the chassis with nine FMS M3*5 screws.
5.2.9.10. I/O Cover Integration
29. Plug the I/O module to the IOINF1 slot on the
motherboard and retain it to the chassis with nine
FMS M3*5 screws.
30. Fix a stand bracket (13) at the bottom side of the
chassis with two FMS M3*5 screws.
5.2.9.11. Plastic Cover Integration
31. Insert the expansion door plastic
cover (14) the back cover and
click it into place.
32. Retain the rear plastic
cover (15) to the whole unit
together with seven PMS
M3*8 screws.