One World Touch MP1200, Service Manual

Page: 49 / 110

Service Manual version 1008
MP1200/MP1500 (PC920 Intel 945G)
5-41
FMS 6#32 5L (2)
5.2.4. Power Module Assembly
The power supply is to be integrated to a power bay before it is installed to the panel PC. The following
figure illustrates the steps to assemble the ATX power module. For the specification of the power
supply, please refer to APPENDIX.
1. Attach the power bracket (2) to the power supply (3) and fix them together with two FMS 6#32 5L
screws. This small bracket is used to prevent the power supply from moving around in the power
bay.
2. Insert the power supply to the power bay (1) and fix them together with two FMS M3*5 and two
FMS 6#32 5L screws.
3. Protect the front section power cables with a nylon protector. The nylon protector is to prevent
the power wires from being cut by the metal brackets.
4. Attach two nylon adhesive cable tie bases to the side of the power bracket.
5. Retain the power cable bundle to the mounting base with a cable tie.
6. Insert a power switch (4) extension cable to the power bracket (1).
(1)
(2)
(3)
The power cable
coming out from
the opening and
connected to the
MB’s ATX power
connector.
FMS 3*5 (2)
FMS 6#32 5L (2)
P
OWER MODULE ASSEMBLY
(4)