Page 12
For technical questions, please call 1-800-444-3353.
Item 69893
1.
Insert Normal Bolts
(65) through all holes in the
front of the Front Ceiling Plates
(24, 25), as
shown.
Thread a Nut
(67) onto each
Bolt, but leave all Nuts loose for now
.
2.
Slide the slot on the Right Door Rail
(27) over
the heads of the 2 Bolts on the Front- right
Ceiling Plate
(25) until the right end
is flush, as shown.
The illustration in the center of this page shows how to slide the Rail over the Bolt heads.
Tighten the Nuts on those 2 Bolts.
3.
Slide the Bolt heads on the Front-left Ceiling Plate
(24) into the slot of the
Right Door Rail
(27) from the left edge until
it rests against the Front-right Ceiling Plate
(25).
Tighten the 2 right-most Nuts on the Ceiling Plate.
4.
Slide the slot on the Left Door Rail
(26) over the
heads of the remaining three Bolts in the Front- left Ceiling Plate
(24) until it presses against the
Right Door Rail
(27).
Tighten the remaining Nuts.
Phase 4a: Ceiling Plate
Assembly
, Front
26, 27
24, 25
65
Parts in this phase
are fastened using
7
Normal Bolts
(65)
and 7
Nuts
(67)
.
Step 3
25
27
24
Tighten these two
Nuts after sliding
Step 4
27
26
25
24
Step 2
25
27
Step 1
24
25
65
65
65
65
65
Summary of Contents for 69893
Page 1: ......
