Page 7
For technical questions, please call 1-800-444-3353.
Item 69893
Base Assembly Instructions
1. Excavate an area for the base of the
greenhouse.
The area must be 10′ 2″ wide by
12′ 2″ long by 5″ deep. The floor of
the hole must be level and square.
The diagonal dimensions, from corner
to corner, should each be 15′ 5″.
2. Assemble the Base outside
the hole as shown below.
Note that the angled edges of the
Base Plates (43, 44) need to face the
corners of the base. Use Base Bolts (68),
Base Nuts (69), and Connectors (45, 46)
to secure the pieces together.
3. With assistance,
lower the Base into the hole.
The diagonal dimensions,
from outside corner to outside corner,
must be equal for the base to be square.
4. Fill the hole around the outside
of the base with soil.
5. This base will need to be filled with
about 40 cubic feet of gravel or another
appropriate fill material (not provided).
The gravel should reach up to about
1″ below the lip of the base.
Summary of Contents for 69893
Page 1: ......
