20
Installation & Operation Guide: Oncam Grandeye 360
o
Evolution Camera Range
Version 2.4 | January 2014 | Oncam Grandeye, 115 Hammersmith Road, London. W14 0QH. UK
T: +44 (0)20 7371 6640 | E: [email protected] | W: www.oncamgrandeye.com
The bracket has a hole in it that accommodates a conduit connection into the back of the wall mount if it is
necessary to protect the wires from the environment. The wall mount cleat attaches directly to the pole bracket in
the same manner as the base plate.
The corner mount is a bracket that adapts the wall mount to fit diagonally on the corner of a building. Attachment
to the building is via four appropriate fixings (not provided). The bracket has an opening that accommodates a
conduit connection into the back of the wall mount. The wall mount cleat attaches directly to the corner mount
bracket in the same manner as the pole mount.
4.3.7
Sun Shield
The sun shield is an accessory for applications where the enclosure is exposed to direct sunlight. The shield
provides an outer surface that is separated from the enclosure by an air gap. The heat that is absorbed in the shield
is not conducted into the enclosure because the air gap acts as an insulator. On a clear sunny day the enclosure’s
internal temperature can get too hot for the camera even when the ambient temperature is not very high. A sun
shield is therefore recommended whenever there is significant exposure to the sun. The shield is only used in
pendant mounting configurations with or without the wall mount. The shield is attached to the top of the pendant
adapter with the three supplied screws.
5
Corner, Wall and Pole Mount Brackets
5.1
Evolution Wall Mount Kit - OBE-04-O#A
(#=W : white / #=B : black)
Ref.
Qty
Description
1
1
Wall Mount Arm
2
1
10-24 rotation set screw
3
1
Cleat Plate
4
1
Mounting Plate
5
2
Mount set screws
6
2
Flat Washers
7
2
Nylon lock nuts
