Oncam Evolution EVO-05NCD, User Manual, Page: 14 / 62

14
Installation & Operation Guide: Oncam Grandeye 360
o
Evolution Camera Range
Version 2.4 | January 2014 | Oncam Grandeye, 115 Hammersmith Road, London. W14 0QH. UK
T: +44 (0)20 7371 6640 | E: info@oncamgrandeye.com | W: www.oncamgrandeye.com
4 Installation Steps
This chapter provides a step ‐ by ‐ step guide to the installation and first ‐ time operation of your Oncam Grandeye
EVOLUTION 360° IP camera. Please refer to the Camera Web Interface configuration chapter for a more detailed
explanation on features and functionality. All Oncam Grandeye 360° IP cameras can be either wall mounted or
ceiling/table mounted. These cameras have an exceptionally wide viewing angle, so some consideration should be
given to camera location. For example, if one side of a scene is brightly lit and another is in dark shadows, you may
have to choose which portion of the picture to optimise.
4.1 Evolution Indoor Camera
4.1.1 Supplied Parts
• Evolution indoor ceiling plate
•
Camera module
•
Cover
• Quick start guide
• Mounting template
4.1.2 Description
This enclosure is designed for indoor use in surface mount or pendant
applications. In its basic form, the indoor model consists of the Camera
Module, a mounting plate, and a cover.
The enclosure portion of this model consists of two parts – a die cast
mounting plate and a plastic cover. The cover does not require any
fasteners to fix it to the base plate. Wires can be routed into the enclosure
either from the back or the side.
4.1.3 Installation Steps
The ceiling mount plate is attached to a wall or ceiling surface via the holes and slots located on the plate. The
fasteners used should be appropriate for the surface material, and should collectively support at least four times the
weight of the camera and assembled enclosure.
The enclosure is designed to cover a hole or box in the mounting surface through which the wires are pulled. The
mounting plate has been designed with holes and slots to allow it to be mounted directly to most European or
American standard electrical boxes, if desired.
If the indoor installation is subject to vandalism, the Evolution outdoor camera model should be used. This indoor
enclosure should only be used where it is well out of reach.
The wires are pulled through the centre hole in the plate, and then the plate is secured to the mounting surface. It is
important to pay attention to the orientation of the plate, as this will affect where the elongated ears of the cover are
oriented.
The enclosure has been designed to allow wires to be routed under and then around or over the Camera Module to
the connection points. The alarm connector (if used) can be removed from the Camera Module to facilitate
connection and service.