16
Installation & Operation Guide: Oncam Grandeye 360
o
Evolution Camera Range
Version 2.4 | January 2014 | Oncam Grandeye, 115 Hammersmith Road, London. W14 0QH. UK
T: +44 (0)20 7371 6640 | E: [email protected] | W: www.oncamgrandeye.com
4.2
Evolution Indoor Concealed Camera
4.2.1
Supplied Parts
•
Camera module
•
Concealed mounting bezel
•
Concealed mounting locking nut
•
Quick start guide
4.2.2
Description
This enclosure is designed for indoor use in above ceiling applications. In its basic form, the in ceiling model consists
of the Camera Module, a bezel, and a mounting nut.
The enclosure portion of this model consists of parts – a plastic ceiling bezel and a plastic nut. The only portion of
the camera that is visible below the ceiling is the lens and bezel.
4.2.3
Installation Steps
The in ceiling model requires that the installer have access to the
space above the ceiling. The ceiling surface is first drilled or cut to
accept the bezel (2 ½” or 64mm). Attach the supplied hole template to
the installation location and mark the hole. If it is possible, remove the
false panel and then using a pad saw carefully cut out the hole or using
a hole cutter, cut a 64mm (2 ½”) hole.
Insert the concealed bezel through the hole from the front of the cut out (Lens side) with one
hand and using the other hand fit the blue locking nut to the rear to secure the bezel in
place.
Ensure the locking nut is correctly orientated so that the smother side is against surface of
the ceiling / wall material, and the finger grips are exposed.
Do not over tighten the locking nut.
This camera is not to be used in air handling spaces.
Failure to comply with this requirement
will invalidate the warranty.
