Omron V750 series, Network Connection Manual

Page: 50 / 78

9. Program
9.5.2. Program List
This section shows the details on the program.
The function blocks (ParameterSet, SendMessageSet, and ReceiveCheck) are used to
perform the communications settings, send data (command data) setting and receive data
(response data) check that must be changed according to the destination device. For
information on how to change these values, refer to
9.5.3 Detailed Description of Function
Blocks
.
● Program: Program0
(General-purpose Ethernet communications Connection check program)
1. Communications processing
47