Omron V750 series, Network Connection Manual

Page: 10 / 78

5. Applicable Devices and Support Software
5.2. Device Configuration
The hardware components to reproduce the connection procedure of this document are as
follows:
7
Manufacturer Name Model Version
OMRON NJ-series CPU Unit
(Built-in EtherNet/IP port) NJ501-1500 Ver.1.03
OMRON Power Supply Unit NJ-PA3001
OMRON Switching Hub W4S1-05C Ver.1.0
OMRON Sysmac Studio SYSMAC-SE2[][][] Ver.1.04
OMRON Sysmac Studio project file OMRON_V750_ETN(TCP)
_EV101.smc Ver.1.01
- Personal computer
(OS:Windows7)
-
- USB cable
(USB 2.0 type B connector)
-
- LAN cable -
OMRON RFID Reader/Writer V750-BA50C04-US Ver.102-10
2-103-0
OMRON Antenna (Circular) (4 max.) V740-HS01CA
OMRON Antenna cable V740-A01[][]M
OMRON AC Adapter (included) -
Precautions for Correct Use
Prepare the latest project file in advance.
To obtain the file, contact your OMRON representative.
Precautions for Correct Use
Update the Sysmac Studio to the version specified in this section or higher version using the
auto update function. If a version not specified in this section is used, the procedures
described in Section 7 and subsequent sections may not be applicable. In that case, use the
equivalent procedures described in the Sysmac Studio Version 1 Operation Manual (Cat.No.
W504).
NJ501-1500
(Built-in EtherNet/IP port)
Switching hub
W4S1-05C
Personal computer
(Sysmac Studio installed,
OS: Windows 7)
USB cable
LAN cable
Antenna
(V740-HS01CA)
RFID Reader/Writer
(V750-BA50C04-US)
AC Adapter
(included)
Antenna Cable
(V740-A01 [][]M)