Omron V750 series, Network Connection Manual

Page: 20 / 78

7. Connection Procedure
11 Cycle the power supply to the
RFID Reader/Writer.
*The new parameters will be
enabled after the power supply
is cycled.
Additional Information
In addition to changing the Ethernet settings on the web browser screen, you can set and
read the Ethernet parameters by using the setting commands (SETR and GETR). For
information on the specifications of the setting commands, refer to
Section 5 Command Line
Interface
in the
V750-series UHF RFID System User’s Manual
(Cat. No. Z235).
17