V740 RFID READER/WRITER, ANTENNA
2005-09, REV0.1
OPERATION MANUAL
20 of 56
©OMRON CORPORATION 2005
Network Settings: All Interfaces
Static network settings are ignored when in DHCP mode, and DHCP related settings are ignored when in static
IP mode. Please note that your network needs to have properly configured DNS servers if you wish to connect
to the reader via its hostname. Usually when using DHCP, the DHCP server will add the hostname to the DNS
server’s database.
Item
Describe
Setting
Requirement
Default
Automatic
Hostname
Turning on automatic hostname will append the last six
numbers (3 bytes) of the reader’s MAC address to the text
in the hostname field.
With the unique hostname, avoid the same hostname
existing in the network, which may occur while some
readers are operating simultaneously in DHCP mode.
Optional No
Hostname
Specify a name that is unique on the network for the
reader.
Mandatory v740
NTP Server
Specify the IP address (or machine name) of the server to
get current time from the network (either LAN or WAN). The
reader obtains the correct time from another device since it
doesn't have a hardware clock.
Example) 129.6.15.8(NIST, Gaithersburg, Maryland)
Optional (none)
Domain Name
Specify the group name when using devices on the network
as a group. Omit unless using devices as a group.
Optional (none)
Primary
DNS Server
Specify the IP address (or machine name) of the server
that replaces a domain name with an IP address on the
network. It is used first, the secondary DNS server is used
next. Omit if you access by the static IP address.
Optional 10.0.0.1
Secondary
DNS Server
Specify the IP address (or machine name) of the server
that replaces a domain name with an ID address. The
server is used only when the primary DNS server can not
find the domain name. Omit if you access by the static IP
address.
Optional (none)
Default Gateway
Select whether the reader uses LAN wired or air interface.
-
LAN(fixed)
