![background image](http://html1.mh-extra.com/html/omron/v740-hs02c/v740-hs02c_operation-manual_741963021.webp)
V740 RFID READER/WRITER, ANTENNA
2005-09, REV0.1
OPERATION MANUAL
21 of 56
©OMRON CORPORATION 2005
Network Settings: Ethernet Interfaces
Item
Describe
Setting
Requirement
Default
Use DHCP
Select whether the reader gets an IP address on the
network automatically by DHCP or manual setting. You
must not check the item if you use a manually set IP
address.
Optional Yes
Vendor Class
Identifier
Specify an extra DHCP parameter for integration and
customization. It is not supported on the firmware version
2.2.22.
Optional mercury4
Use DHCP
Server Supplied
Hostname
Set this to
yes
to allow the DHCP server to assign the
reader a hostname.
- No
LAN IP Address
Specify a unique IP address on the network when manually
set. It is given automatically by the DHCP server, if using
DHCP.
Mandatory (in
the case of not
using DHCP)
10.0.0.101
LAN Netmask
Specify the mask value to determine the network address
of the subnet from the IP address. It is not used if using
DHCP.
Mandatory (in
the case of not
using DHCP)
255.255.255.0
LAN Gateway
Specify a unique IP address for the gateway machine only
when communicating with the device on another LAN. You
don't have to set the item when communicating with the
device on the same LAN. Also It is not used if using DHCP.
Optional (in the
case of not using
DHCP)
10.0.0.1
Fallback IP
Address
IP address to be used If any DHCP server can't be found
when in DHCP mode.
Optional (in the
case of using
DHCP)
(none)
Fallback
Netmask
Subnet mask to be used if any DHCP server can't be found
when in DHCP mode.
Optional (in the
case of using
DHCP)
(none)
Fallback
Gateway
Default gateway to be used If DHCP server can't be found
when in DHCP mode.
Optional (in the
case of using
DHCP)
(none)